Qingdao common plate flange duct construction site prone to what problems?

The decision should be made according to the specific development trend of the students, instead of what size of goods to use. The scientific research on the length of the pipeline should also be combined with the specific working conditions of our country. If all the production lines are very long or the pipeline system software and mechanical equipment required for social development are very long, longer pipelines need to be purchased. Note that Qingdao common plate flange air ducts would rather buy long ones than short ones. Longer pipelines are fine, the shorter pipe has no solution.

In the exhaust system design scheme and construction site of all Qingdao common plate flange air ducts, it is important to pay attention to the quality of Qingdao common plate flange air ducts, which will immediately endanger the natural ventilation and natural ventilation effect of all engineering buildings. It is clear that higher regulations are put forward for the manufacturing process of Qingdao common plate flange air ducts. Therefore, in the Qingdao common plate flange air ducts of the main engineering buildings, large iron pipes will be used as much as possible in the new engineering construction, to ensure that the entire construction process and production process of all iron pipes are directly related to the iron pipe.

When buying ordinary plate flange conduits, you should know the required size and diameter, because the pipes are divided into thicknesses. Some pipes have smaller inner diameters but larger diameters, and some have larger inner diameters but smaller diameters. The inner diameter and outer diameter of the pipe are directly related to the thickness of the pipe itself. In order to better understand, we need to know our own size and specifications;

The application of Qingdao common plate flange air duct in modernist buildings is becoming more and more scientific. In the whole process of project construction, the general rule is that small pipes exit thick pipes: small pipes are easy to bend and low in cost. This specification is to circumvent the specification. Let's talk about the avoidance rules in ventilation pipeline engineering, hoping to be helpful to everyone.

1. small pipe made of coarse pipe: small pipe corner processing technology is simple, low engineering cost.

2. Branch pipe: branch pipe diameter is generally small, the client program is the client program.

3. The pressure pipe is a non-pressure pipe (the pressure flow pipe is a gravity flow pipe): The inclination and inflow of the non-pressure pipe (or gravity flow pipe) change, which is very harmful to the theme activity.

4. Normal temperature pipes allow high (low) temperature pipes (cold water pipes allow heating pipes), and non-thermal insulation steel pipes allow thermal insulation steel pipes): The construction quality of angle steel flange air ducts is higher than normal temperature, and exhaust pipes should be considered; if it is lower than other normal Temperature, heat preservation of condensed water must be considered.

5. Water supply pipes do sewage pipes: In addition to the above three factors, sewage pipes generally pass through a relatively large distance, and there are more residues in the water.

6. The bottom pressure pipe is used as an air-conditioning pipe: the cost of the air-conditioning pipe increases and the compressive strength is also high.

7. The fuel pipe as a water pipe: the water theme activity is power intensive.

8. Generally speaking, the angle steel flange duct of the pipeline is huge and cannot be bent.

9. Manufacture of metal hose non-metal pipe: metal hose is easy to bend and connected by laser cutting.

The above is the small series to explain the "Qingdao common plate flange duct construction site prone to what problems?" content, we all understand? If you want to know more content, welcome to contact us.