Qingdao galvanized iron ductIt is a ventilation and exhaust pipe equipment that is very needed in the production process of many enterprises. The installation needs of different enterprises, different gas substances, and the appearance and materials of galvanized iron pipes are also different. Many underground garages set up smoke exhaust pipes through underground garages for the sake of communities. The installation of galvanized iron duct is a complicated construction process. How to operate it? Then, let's learn what problems need to be paid attention to in the construction process of galvanized iron duct!

For more complex civil buildings, in the design stage, each type of work should negotiate the space separation and determine the elevation range of each pipeline. Generally, they cannot exceed the limits set by themselves. When the transit section, it should be negotiated with other works of ventilation ducts. To solve the collision and coordination principle of various ventilation pipes, it is generally adopted that "small pipes are large pipes with pressure and no pressure". For example, when a water pipe collides with a pipe, it is necessary to bend the water pipe. When the cold water and hot water pipes collide with the sewer pipes, replace the cold water and hot water pipes.

Qingdao Galvanized Iron Duct Factory: Galvanized Iron Duct adopts a straight line of standard length, reducing the number of various reducer pipes and accessories to a reasonable range. Straight and standard length ventilation pipes are relatively cheap, and their processing costs are low, so standard length straight pipes can be made on the automatic production line with standard width steel plate coils. Non-standard length rectangular ducts cannot be made with standard coils, so they can be used as accessories technically. The spiral conduit may be of virtually any length. The standard length of the oval duct depends entirely on the processing standards of the metal processing plant. Some designers often think that in the plane design of a duct system, the frequent reduction of the cross-sectional size of the duct can reduce an investment.

　　Qingdao galvanized iron ductManufacturer: Galvanized iron duct is a component of common air conditioning installation facilities. When we use it at ordinary times, the overall thickness affects our normal use. However, there are many hands and feet of iron duct materials, and there is no big difference between 0.5 and 0.7 boards in use. Construction personnel should strengthen material control in construction compared with the pipeline supervision at the bottom of the design requirements and Party A.

Qingdao Galvanized Iron Duct Factory: When we usually make galvanized iron duct, we can make the overall thickness according to the use environment and overall quality inspection, so as to ensure the use quality. Galvanized iron duct installation is simple, convenient on-site production, and civil construction closely cooperate, can adapt to very complex purification ventilation engineering, only choose a better use of the environment, in order to give full play to the high performance of the iron ventilation pipe.

Qingdao galvanized iron duct manufacturer: before the construction of galvanized iron duct, the design drawing shall be drawn, and the single line of each type of pipeline shall be drawn on a plan. Use colored pens for each pipeline, and integrate the elevation at each intersection point to see if there is any contradiction, find it in time, and solve the problem before installation. In order to reduce investment, save space, reduce the height of the floor, laying no slope pipe, some can be laid through the beam.

The above introduction is inQingdao galvanized iron ductWhat problems should be paid attention to in the construction process introduced by the manufacturer? If you need to know more, please feel free to contact us!